BATE RC - BATE RC010

Electric coils

Circulars - Regulated

View larger

BATE RC - BATE RC010

Electric coils

Circulars - Regulated

Integrated ModBus communicating regulation
Thermal protections and safety switch
Air flow sensor
Power from 600 to 18,000 W
Connection by class C watertight joints

Application

Installation in circular, horizontal or vertical metal ducts.
Terminal heating or defrosting.
Maximum outlet temperature 50°C.

Tertiary buildings

Industrial and logistics buildings

Order online

Description
Dimensions
Documentation
Public Price
Software
References

Diameters from 100 to 500 mm.
Power from 300 to 18,000 W.
Single-phase 230V 50Hz or three-phase 400V +N 50Hz power supply.

BATE RC: autonomous.
BATE RC010: controlled by an external 0-10V signal.

BATE RC

Construction

Waterproofing class D according to standard EN 15727.
Circular ferrule and junction box made of Aluzinc treated steel.
IP44 protection rating.
Cut-to-size cable grommets.
Heating elements sheathed in 304 stainless steel.
TJK10K Sheath Probe (IP20)
Housing (IP20) equipped with an NTC10 ambient probe and a setpoint adjustment potentiometer: 0 to 30°C.

Functioning

Minimum speed = 1.5 m/s - Maximum speed = 10 m/s
Two possible operating modes:
Duct blowing temperature regulation.
Ambient temperature regulation with low and high temperature limitation at the blower (+15°C/+40°C).

Security

Airflow sensor for operation only when ventilation is present.
Two safety thermostats:
A thermostat with automatic reset to 50°C.
A thermostat with manual reset 100°C.
Power supply cut-off in case one of the safety thermostats is triggered:
directly via thermostats up to and including 3kW in Mono,
by an integrated contactor in other cases.
Auxiliary relay with NO contact + NC contact, allows the battery overheating information to be relayed to the CTA or GTC regulation.
Plan to link the operation of the electric battery to the operation of the ventilation system
Provide post-ventilation to ensure the pins cool down after the ventilation stops (accessory MCR1)

Regulation

Triac-type electronic power converter.
3 operating mode indicators: voltage presence / heating / fault.
Digital entry for remote walking authorization
Modbus RTU communication over RS485 port.

BATE RC010

Construction

Waterproofing class D according to standard EN 15727.
Circular ferrule and junction box made of Aluzinc treated steel.
IP44 protection rating.
Cut-to-size cable grommets.
Heating elements sheathed in 304 stainless steel.

Functioning

Minimum speed = 1.5 m/s - Maximum speed = 10 m/s.
Heating power controlled by an external 0-10V signal from a single or double flow AHU with its own temperature regulation.

Security

Airflow sensor for operation only when ventilation is present.
Two safety thermostats:
A thermostat with automatic reset to 50°C.
A thermostat with manual reset 100°C.
Power supply cut-off in case one of the safety thermostats is triggered:
directly via thermostats up to and including 3kW in Mono,
by an integrated contactor in other cases.
Auxiliary relay with NO contact + NC contact, allows the battery overheating information to be relayed to the CTA or GTC regulation.
Plan to link the operation of the electric battery to the operation of the ventilation system
Provide for post-ventilation to ensure the cooling of the pins after the ventilation stops (AHU regulation).

Regulation

Triac-type electronic power converter.
3 indicator lights for operating mode: voltage presence / heating / fault.
Digital entry for remote walking authorization
Modbus RTU communication over RS485 port.

Ø (mm)	Power (W)	A	B	C	D
100	300 to 1800	276	373	195	48.5
125	900 to 9000	276	373	195	48.5
160	900 to 9000	276	373	230	48.5
200	900 to 9000	276	373	270	48.5
250	900 to 9000	276	373	320	48.5
250	12000	400	497	320	48.5
315	900 to 9000	276	376	385	50
315	12000	400	500	385	50
355	900 to 9000	276	376	425	50
355	12000	400	500	425	50
400	900 to 9000	276	376	470	50
400	12000	400	500	470	50
500	18000	530	630	570	50