EXUBAIE V2

Fresh air supply

Front - Insulated panel

View larger

EXUBAIE V2

Fresh air supply

Front - Insulated panel

Thermal insulation
Neat aesthetics, anodized aluminum finish
Very good front integration
Invisible mechanism, integrated into the profiles
Very good air and water tightness
Possibility of RAL color
Double glazing optional

Applications:

Facade opening used as a fresh air supply for smoke extraction in public buildings, collective housing and high-rise buildings, meeting the requirements of new buildings where heat losses must be as low as possible.
Remote controlled Safety Actuated Device (DAS) intended for the introduction of fresh air into the exterior facade of the building (vertical facade only).
Closed in the standby position and open in case of fire to allow the introduction of fresh air.
Possibility of use in natural smoke evacuation.
Possibility of installation in curtain wall (glass roof), product adaptation is necessary, consult us.

Collective residential buildings

Tertiary buildings

Description
Dimensions
Documentation
Public Price
Software
References

Dimensions LxH: 420x420 to 1600x1200.
Free area up to 160 dm².
Opening of the type "drop-down towards the outside", by intrinsic energy (2 cylinders) following an electromagnetic release.
Electromagnetic tripping by 24 Vdc or 48 Vdc shunt or break coil and unipolar start / limit switches (FDCU) factory fitted. For products with a length greater than or equal to 1200 mm, two electromagnetic releases are required.
Manual reset only.
Interior covering grilles (GFAV, GAAV) to have a uniform aesthetic with the covering grilles for shutters from the AVANTAGE range.

Description

Chassis composed of the frame and a solid aluminum panel with its insulation which opens thanks to 2 jacks.
Electromagnetic release as well as the start / end of travel contacts integrated in the frame and panel profiles and therefore invisible when the EXUBAIE V2 is in the standby position.
Frames, fixed or opening, made up of two profiles connected by polyamide bars crimped between the exterior and interior faces of the RPT (Thermal Bridge Break) frames.
Triggering carried out by an electromagnetic coil with emission or rupture 24 Vdc or 48 Vdc.
Single-pole start / end position contacts (FDCU).
Manual reset using a handle.
Frame and panel opening made of aluminum profiles, which allows perfect integration in both concrete walls and carpentry (wood, metal).
As standard, the central panel is made of insulated solid aluminum panel: 2 sheets 15/10 + 30 mm expanded polystyrene (EPS).
On request, it is possible to have standard double glazing (toughened insulation with a laminated face 4/10 / 33.2) or thermal double glazing (insulation 4/16 Ar / 4 climaplus).
Specific RAL finish possible on request, contact us.
For installation in a masonry wall (concrete), it is strongly recommended to provide a 78x20 mm bib as an accessory as well as a joint cover to ensure a perfect finish.

The openings codified in the TARIFF are without option.

The order must be accompanied by:
- A 24 or 48V trip coil with VD shunt or VM break: optionally VD24 or VM24 or VD48 or VM48.
- Unipolar end and start of stroke position contact: FDCU option.
- Note: From lengths ≥ 1200 mm, two electromagnetic releases are required.

EXUBAIE V2

Free passage (in dm²)
H / L	420	500	600	700	800	900	1000	1100	1200	1300	1400	1500	1600
420	9.0	11.4	14.4	17.4	20.4	23.4	26.4	29.4	32.4	35.4	38.4	41.4	44.4
500	11.4	14.4	18.2	22.0	25.8	29.6	33.4	37.2	41.0	44.8	48.6	52.4	56.2
600	14.4	18.2	23.0	27.8	32.6	37.4	42.2	47.0	51.8	56.6	61.4	66.2	71.0
700	17.4	22.0	27.8	33.6	39.4	45.2	51.0	56.8	62.6	68.4	74.2	80.0	85.8
800	20.4	25.8	32.6	39.4	46.2	53.0	59.8	66.6	73.4	80.2	87.0	93.8	100.6
900	23.4	29.6	37.4	45.2	53.0	60.8	68.6	76.4	84.2	92.0	99.8	107.6	115.4
1000	26.4	33.4	42.2	51.0	59.8	68.6	77.4	86.2	95.0	103.8	112.6	121.4	130.2
1100	29.4	37.2	47.0	56.8	66.6	76.4	86.2	96.0	105.8	115.6	125.4	135.2	145.0
1200	32.4	41.0	51.8	62.6	73.4	84.2	95.0	105.8	116.6	127.4	138.2	149.0	159.8