• Self-supporting structure box interior finish in galvanized steel.
• Exterior finish in white painted aluminum, RAL 9003.
• Interior thermoacoustic insulation in melamine foam, density 9.5 kg/m³, M1 classification.
• Perforated sheet metal at the outlet below the device serving as access hatches to the extraction filters.
• Diffusion grille in the lower part of the front face, black RAL 9011 color.
• Access to fresh air filters and fans via hinged doors at the bottom of the unit.
• Condensate collection tray equipped with a condensate drain pump (factory connected) and a quick connector for Ø8 mm drain pipe.
• Single action inlet fan.
• Low consumption ECM motor, direct current, single phase 230V. Electronic thermal protection - manual reset

• Motorized damper on the fresh air inlet, mounted, wired, controlled by the regulation, with non-return valve on extraction to prevent air inlets when the unit is stopped.

• High-efficiency air/air counter-current exchanger made of aluminum, operating temperature up to 80°C. Thermal efficiency up to 90%.
• Antifreeze protection of the exchanger integrated into the regulation by progressive opening of the by-pass or proportional control of an electric antifreeze battery
• Bypass 100% equipped with a proportional motor.

*extraction filter supplied in 2 parts of 552 mm.

In accessories

• Power 2Kw Mono 230V.
• Delivered fully pre-wired and connected to the control.
• Power regulated proportionally.
• Thermal protection with automatic reset (60°C) and manual reset (85°C).

• Power 3Kw Mono 230V or 1.5kW if antifreeze battery.
• Delivered fully pre-wired and connected to the control.
• Power regulated proportionally.
• Thermal protection with automatic reset (60°C) and manual reset (85°C).

• Battery made of copper tube and aluminum fin.
• Antifreeze protection probe on the water return.
• 3-way motorized valve proportional by 0-10V signal (accessory).

• Complete regulation allowing 2 operating modes:

• Programmable regulation from the remote control.