BATR RC - BATR RC010

Electric coils

Rectangular - Regulated

View larger

BATR RC - BATR RC010

Electric coils

Rectangular - Regulated

Integrated ModBus communicating regulation
Thermal protections and safety switch
Air flow sensor
Power from 6 to 66 kW

Application

Installation in circular, horizontal or vertical metal ducts.
Terminal heating or defrosting.
Maximum outlet temperature 50°C.

Tertiary buildings

Industrial and logistics buildings

Description
Dimensions
Documentation
Public Price
Software
References

Dimensions B x H: 400 x 200 to 1000 x 500 mm.
Power from 6 to 66 kW.
Mono 230V 50Hz power supply, Tri 400V+N 50Hz.
BATR RC: autonomous.
BATR RC010: control by an external 0-10V signal.

BATR RC

Construction

IP44 body and housing in aluzinc treated steel.
Connection by undrilled flanges.
IP44 cable gland to be cut
Heating elements shielded in 304 stainless steel.
TJK10K Duct Probe (IP20)
Housing (IP20) equipped with an NTC10 room sensor and a setpoint adjustment potentiometer: 0 to 30°C.

Functioning

Minimum speed = 1.5 m/s - Maximum speed = 10 m/s
Two possible operating modes:
Regulation of the blowing temperature in the duct.
Room temperature regulation with low and high limitation of the blowing temperature (+15°C/+40°C).

Securities

Air flow sensor for operation only when ventilation is present.
Two safety thermostats:
A 50°C automatic reset thermostat.
A thermostat with manual reset 100°C.
Power supply cut-off if one of the safety thermostats is triggered by an integrated contactor.
Auxiliary relay with NO contact + NC contact, allows the battery overheating information to be transmitted to the CTA or GTC regulation.
Plan to link the operation of the electric battery to the operation of the ventilation
Provide post-ventilation to ensure cooling of the pins after ventilation is stopped (MCR1 accessory)

Regulation

Triac type electronic power converter.
3 operating mode indicator lights: voltage/heating/fault presence.
Digital input for remote operation authorization
Modbus RTU communication on RS485 port.

BATR RC010

Construction

IP44 body and housing in Aluzinc treated steel.
Connection by undrilled flanges.
IP44 cable gland to be cut.
304 stainless steel shielded heating elements.

Functioning

Minimum speed = 1.5 m/s - Maximum speed = 10 m/s
Heating power controlled by an external 0-10V signal from a single or double flow CTA with its own temperature regulation.

Securities

Air flow sensor for operation only when ventilation is present.
Two safety thermostats:
A 50°C automatic reset thermostat.
A thermostat with manual reset 100°C.
Power supply cut-off if one of the safety thermostats is triggered by an integrated contactor.
Auxiliary relay with NO contact + NC contact, allows the battery overheating information to be transmitted to the CTA or GTC regulation.
Plan to link the operation of the electric battery to the operation of the ventilation
Provide post-ventilation to ensure cooling of the pins after ventilation has stopped (CTA regulation).

Regulation

Triac type electronic power converter.
3 operating mode indicator lights: voltage/heating/fault presence.
Digital input for remote operation authorization
Modbus RTU communication on RS485 port.

B (mm)	H (mm)	L (mm)	Power (kW)
400	200	370	6 to 12
400	200	420	15
500	250	370	6 to 12
500	250	600	24
500	300	370	9 to 24
500	300	440	30
600	300	370	9 to 18
600	300	440	27
600	300	520	36
600	350	370	12 to 30
600	350	520	42
700	400	370	15 to 42
700	400	440	60
800	500	370	21 to 39
800	500	500	66
1000	500	370	24 to 45
1000	500	500	66