BATE R - BATE R010

Old ranges

Circulars - Regulated

View larger

BATE R - BATE R010

Old ranges

Circulars - Regulated

Integrated ModBus communicating regulation
Integrated thermal protections
Power from 600 to 18,000 W
Connection by class C watertight joints

Application

Fits into a horizontal or vertical network of circular ducts.
Terminal heating.
Defrosting.
Maximum outlet temperature 50°C.

Tertiary buildings

Industrial and logistics buildings

Buildings for catering

Order online

Description
Dimensions
Documentation
Public Price
Software
References

Diameters from 125 to 500 mm.
Power from 600 to 18,000 W.
Single 230V 50Hz, three 400V 50Hz or three 400V + N (18kW) 50Hz power supply.
Communicating ModBus RTU on RS485 port

BATE R: integrated autonomous regulation.
BATE R010: integrated regulation for external 0-10V signal.

BATE R: integrated autonomous regulation

Operation

Duct blowing temperature regulation.
Room or return temperature regulation with or without supply air limit.
Minimum speed = 1.5 m / s - Maximum speed 10 m / s.
Need to control the heating to the operation of the fan.
Provide an MCR1 type time delay which delays the stopping of the fan to cool the pins.
Provide a contactor to cut off the power supply in the event of triggering of one of the safety thermostats
The contactor will be equipped with an auxiliary contact (NO/NC) to transfer the information to the regulation of the ventilation unit or to the BMS.

Construction

Circular ferrule and IP44 connection box in Aluzinc treated steel.
Connection by watertight class C joints.
IP44 grommet to cut.
Heating elements shielded in stainless steel 304.
Safety thermostats with NC contact pre-wired in series, to be connected to an external power contactor:
1 safety thermostat with automatic reset 50°C.
1 safety thermostat with manual reset, set point 100°C.
2 LEDs indicating heating / operating mode-fault.

PID regulation

1 electronic power regulator type Triac.
1 safety air flow sensor.
1 TJK10K (IP20) duct probe for measuring the supply air temperature or high and low limitation (+ 15 ° C / + 40 ° C).
1 box with NTC10 room sensor and TR5K (IP20) potentiometer with 0 to 30 ° C adjustment.
- TR5K activated only if using the TJK10K duct probe to measure the supply air temperature.
- TR5K + NTC10 activated if measurement in room + limitation in duct with TJK10K.
ModBus RTU communication on RS485 port (setpoint temperature adjustment, alarms, etc.).

BATE R010: integrated regulation 0-10V external signal

Operation

In association with a Single or Double flow air handling unit delivering a 0-10V signal.
Minimum speed = 1.5 m / s - Maximum speed 10 m / s.
Need to control the heating to the operation of the fan.
Provide a time delay which delays the stopping of the fan to cool the pins.
Provide a contactor to cut off the power supply in the event of triggering of one of the safety thermostats
The contactor will be equipped with an auxiliary contact (NO/NC) to transfer the information to the regulation of the ventilation unit or to the BMS.

Construction

Circular ferrule and IP44 connection box in Aluzinc treated steel.
Connection by watertight class C joints.
IP44 grommet to cut.
Heating elements shielded in stainless steel 304.
Safety thermostats with NC contact pre-wired in series, to be connected to an external power contactor:
1 safety thermostat with automatic reset 50°C.
1 safety thermostat with manual reset, set point 100°C.
2 LEDs indicating heating / operating mode-fault.

PID regulation

1 electronic power regulator type Triac.
1 safety air flow sensor.
ModBus RTU communication on RS485 port (alarms, etc.).

Ø (mm)	Wattage (W)	A	B	C	D
125	900 to 9000	276	373	195	48.5
160	900 to 9000	276	373	230	48.5
200	900 to 9000	276	373	270	48.5
250	900 to 9000	276	373	320	48.5
250	12000	400	497	320	48.5
315	900 to 9000	276	376	385	50
315	12000	400	500	385	50
400	900 to 9000	276	376	470	50
400	12000	400	500	470	50
500	18000	530	630	570	50