UTBS ECOWATT - UTBS ECOWATT PRO-REG
Simple flow AHU
Ceiling AHU - Backward - ECM < 8000 m3/h
View larger 
UTBS ECOWATT - UTBS ECOWATT PRO-REG
New product
 | ErP 2018 UVNR compliant Variable EC motor | Filters | |||||
 |  |  | |||||
 |  |  | |||||
- Extra flat central unit: height 360 to 500 mm
- Freewheel fans and low-power ECM motor
- Double skin 25 mm glass wool insulation
- Envelope suitable for C5 environments
- Flow rates from 500 to 8,000 m3/h
- Indoor and outdoor version
Applications:
Introduction of fresh air, heating, air conditioning.
Indoor or outdoor installation.
Floor or ceiling mounting.
Vertical mounting for models without cold battery.
CAD / BIM
Description
Dimensions
Documentation
Public Price
Software
References
Flow rates from 500 to 8,000 m3/h.
4 sizes:
4 sizes:
- Size 2: height 360 mm
- Sizes 3 and 5: height 410 mm
- Size 8: height 500 mm
- 750 mm long module with a filtration stage
- 969 mm long module with two filtration stages
| Battery Type | |||||
| Electric | Hot water | Cold water | Reversible water | Direct relaxation | |
| EI | ■ | ||||
| EIF | ■ | ■ | |||
| EC | ■ | ||||
| ER | ■ | ||||
| ECF | ■ | ■ | |||
| EX | ■ | ||||
Configurations:
- Interiors without roof, without support frame: D right easement - G left easement.
- Interiors without roof, with support frame: DB right servitude - GB left servitude.
- Exterior with roof, without support frame: EXD right easement - EXG left easement.
- Exterior with roof, with support frame: EXDB right servitude - EXGB left servitude.
Additional modules:
- CM: 2-way mixing modules.
- SIL: 750 mm silencer.
- PB: plenum.
- CB: battery box.
UTBS ECOWATT
- Unregulated CTA, only equipped with a REB ECOWATT flow adjustment potentiometer.
UTBS ECOWATT PRO-REG
- CTA with wired mounted regulation, 3 operating modes:
- Variable flow (VAV)
- Constant flow rate (CAV)
- Constant pressure (COP)
- Regulation by CORRIGO integrated automation specific to VIM .
- Communicating ModBus RTU on RS485 port or ModBus TCP/IP, BACnet IP or MSTP.
- ETD2 remote touch control.
Construction
- Modular structure in aluminum profile.
- Online construction.
- Smooth rectangular flanges supplied with the main module.
- Kit for fixing the modules together, consisting of a seal and 4 sets of screws, nuts and washers.
- Exterior finish: pre-painted galvanized steel, dark grey RAL7024. Corrosion resistance C5, ultraviolet resistance RUV5 according to EN 10169.
- Interior in Z275 galvanized steel.
- Insulation with glass wool, thickness 25 mm, density 24 kg/m3 :
- Thermal conductivity 0.035 W/(mk) (20/80°C).
- Fire classification A1 according to standard EN 13 501.1.
- Removable hatches facilitating access to the unit in confined spaces.
- ID suction and/or blowing register panel (accessory).
Equipment of the main modules
Motor fans
- Metallic freewheel type reaction fans (incombustible A1) associated with an ECM electronically commutated motor.
Engines with integrated electronic protection:- UTBS-2: 0.46kW single-phase 230V, 50-60Hz, IP44, class B.
- UTBS-3: 2x0.45kW single-phase 230V, 50-60Hz, IP44, class B.
- UTBS-5: 2x0.85kW single-phase 230V, 50-60Hz, IP54, class F.
- UTBS-8: 2x1.00kW three-phase 400V, 50-60Hz, IP54, class F.
- Filters supplied as standard:
- FIFI M5 ePM10 50 pleated filters%.
- Location for a second filtration stage, optional filters.
- Holding system consisting of two clamping handles.
- Disassembly of filters from the side or below.
- Optional filters:
- FIFI F7 ePM1 55 mini-pleat filters% and FIFI F9 ePM1 80 minifold filters% to achieve a double filtration stage M5+F7 or M5+F9 or F7+F9.
Batteries
- 2 or 4 row hot water batteries (galvanized steel frame, copper tubes and aluminum fins).
- 4 or 6 row cold or reversible water batteries (galvanized steel frame, copper tubes, aluminum fins, 304 stainless steel condensate tray and droplet separator).
- Electric batteries (galvanized steel frame and shielded resistors) with manual (120°C) and automatic (75°C) reset protections, anti-radiation screen.
- Reversible direct expansion battery 1 or 2 circuits on 3 to 6 rows for operation as a condenser or evaporator. Copper tubes and collectors, aluminum fins, galvanized steel frame. Stainless steel condensate recovery tray and droplet separator. Provide a CTA kit with the direct expansion unit (not supplied) equipped with its own probes and temperature regulation system. In the case of a direct expansion battery, the CORRIGO regulator only manages the ventilation and does not manage the temperature regulation. Regulation in COP mode not compatible with a direct expansion battery.
UTBS ECOWATT PRO REG regulation
- CORRIGO regulation mounted/wired, integrated into the unit with remote touch control, allowing 3 operating modes:
FLOW RATE SETTINGS | RECOMMENDED APPLICATIONS |
VAV MODE - VARIABLE FLOW: Variation of fan speed | |
- Flow rate depending on a 0-10 V signal from the extraction, the remote control, an external probe (CO2, temperature, humidity, etc.) or a remote control (M/A + variation). | - Compensation, controlled by a kitchen extraction, |
CAV MODE - CONSTANT FLOW: Fan speed set according to a precise flow | |
- Manual entry (m3/h) of 3 flow rate settings type 0-PV-GV-BOOST. Manual operation or on time slot. | - Installations requiring control of one or more specific flow rates. |
COP MODE - CONSTANT PRESSURE: Automatic variation of fan speed to maintain constant pressure | |
- Constant pressure value measured by an external probe (option) located in the blowing duct network. | - Multi-zone installations, associated with modulation of terminal flow rates. |
- UTBS ECOWATT PRO-REG delivered in CAV mode, without accessories.
Main box
Left servitude as standard (view in the direction of the air):
Interior version without roof:
* With the support frame, the height increases by 80 mm.
Left servitude as standard (view in the direction of the air):
Interior version without roof:
UTBS 2 | UTBS 3 | UTBS 5 | UTBS 8 | |
A (mm) | 360 | 410 | 410 | 500 |
B (mm) | 750 | 1100 | 1500 | 1900 |
* With the support frame, the height increases by 80 mm.
Exterior version with roof:
| Size | HAS | B | C | D |
| UTBS-2 | 910 | 460 | 750 | 428 |
| UTBS-3 | 1260 | 522 | 1100 | 478 |
| UTBS-5 | 1660 | 536 | 1500 | 478 |
| UTBS-8 | 2060 | 640 | 1900 | 568 |
* With the support frame, the height increases by 80 mm.
Main Box Configurations
 Configuration 1: length 750 mm(*) |  Configuration 5: length 1455 mm |
 Configuration 2: length 969 mm(*) |  Configuration 6: length 1455 mm |
 Configuration 3: length 1455 mm |  Configuration 7: length 1205 mm |
 Configuration 4: length 1455 mm |  Configuration 8: length 1455 mm |
| EC2: 2-row hot battery EC4: 4-row hot battery EF4/ER4: 4-row cold (or reversible) battery EF6/ER6: 6-row cold (or reversible) battery EX4: 4-row direct expansion battery EX6: 6-row direct expansion battery EI: Electric Battery M5: FIFI M5 ePM10 55 filter% F: FIFI F7 or FIFI F9 filter location (*) : unregulated version | |
Detailed specifications
Text catalog pages (CT)
Catalog Pages - Other
Public tariff price
Price catalog pages (CP)
Installation instructions
Installation instructions (NT)
Installation instructions (NT) Other
Installation instructions (NT) Other languages
Fire / Smoke extraction certificates
Fire classification report (PVFEU)
Performance / Environment Certificates
Declaration of performance (DOP)
Product environmental profile (PEP)
Electrical / ATEX Certificates
Electrical CE Declarations (DCCE)
Prescription assistance
Specification text (TP)
Commercial documents
Commercial leaflet (FCOM)
OPTAIR CTA
Download the new OPTAIR CTA version (No automatic update from the previous version) 
For any questions, please send an email to optair@vim.fr
| AIR TREATMENT | |||
 | Selection of single or double flow CTAs |
| UTBS ECOWATT |
NINKASI - LYON
Restaurant chains
69 - Rhône
Année : 2019
Maître d'ouvrage : NINKASI
BET Fluides : BET CONCEPT FLUIDES
Installateur : ANVOLIA (dep. 38)
Installed products:
↑
X